This is a Short Crankshaft Version of the Traxxas Pro TRX-15 Engine.
It is for modelers who want higher performance than a .12 size engine
in their 1/10 scale kits such as Nitro Stampede, RC-10GT or GTX.
This is a Pull Start Version.
INCLUDES: One Assembled Engine With Pull Starter
One Air Cleaner (Black rubber with Black foam element)
One Full Instruction Book and Parts Exploded View
One "Traxxas" Decal Sheet
Installed Glow Plug (standard long--no idle bar)
SPECS: According to Traxxas, this engine will produce 20% more power than
the TRX-12, which is approximately 9-11% more power than the OS
CZ-Z. These figures are tested on a dyno (loaded) which provides
power curves on a computer. Traxxas was not able to provide any
numbers on BHP, bore, stroke etc. Keep in mind that these figures
are often useless, as they will vary from engine to engine. And
there are other variables to consider: the kit, terrain, %nitro
in fuel, etc......
Overall Length (front end of shaft to back of starter): 92mm (3-5/8")
Height (top of cylinder head to bottom of backplate): 93mm (3-5/8")
Width (cylinder head): 41mm (1-1/2")
Mount holes (center to center): left to right: 31mm (1-1/4")
front to back: 11mm (7/16")
Overall width of mounting ears (where the holes are): 40mm (1-9/16")
***Mount the same as an OS .12 and .15 CV***
